Mechanical Engineering · Free tool

GD&T reference (ASME Y14.5)

All 14 GD&T symbols, datum reference frames, feature control frames and MMC/LMC bonus tolerance, written against ASME Y14.5-2018. Free to use.

Engineering drawings on a desk beside a digital caliper, a laptop and hand tools.
GD&T only earns its keep if the drawing can be measured.

Geometric dimensioning and tolerancing is how a drawing says what a part must do, not only how long it is. This reference walks through the fourteen GD&T symbols, the anatomy of a feature control frame, the datum reference frame, and material condition modifiers (MMC and LMC) including bonus tolerance — aligned with ASME Y14.5-2018, the edition the toolkit is written against.

Form controls (straightness, flatness, circularity, cylindricity) do not need datums. Orientation, location and runout usually do. Profile can do a lot of work with a well-chosen datum structure. The reference is useful when you are about to put a symbol on a drawing and want to check, quickly, whether you need a datum, whether MMC is legal, and what the control actually restrains.

MMC on a feature of size can give bonus tolerance as the feature departs from maximum material condition, which is how an assembly of pins and holes still fits at the worst case. That bonus is not a gift on a rigidity or sealing surface; use it where the function is assembly. LMC appears less often and is typically about wall thickness or a minimum material condition that must be held.

ASME Y14.5 and ISO GPS are not interchangeable in the details. If your company works to ISO, use this as a concept refresher and follow the ISO standards on the drawing. If a part is inspected on a CMM, write datums that can actually be fixtured or simulated. A pretty feature control frame that cannot be measured is not a specification.

Example

A small, complete frame. A pin must fit a mating housing bore and stand square to a mounting face. A position tolerance at MMC to datums on the mounting face and a key hole, plus a perpendicularity or a tighter position, is usually clearer than a cluster of plus/minus dimensions from three origins. The reference is a place to check the frame before it hardens in CAD.

How to use this tool

  1. Open the GD&T Reference when you are mid-drawing, not after the title block is already printed.
  2. Identify the function (fit, seal, bearing, appearance) and pick the control that matches the function, not the symbol you remember first.
  3. Establish a datum reference frame that matches how the part sits in the assembly or in inspection.
  4. Use MMC only on features of size where bonus tolerance still serves the function.
  5. Check that each frame can be inspected with the equipment you actually have.

Frequently asked questions

Is this ASME or ISO?

The reference is written against ASME Y14.5-2018. ISO GPS uses related ideas with different rules and symbols in places. Do not mix the two systems on one drawing without a clear company rule.

What is bonus tolerance?

When a feature of size is toleranced at MMC (or LMC), additional geometric tolerance is available as the actual size departs from that condition. It is a functional assembly allowance, not extra slop for a sealing face.

Do I need GD&T on every dimension?

No. Use plus/minus where a simple size is enough, and use GD&T where orientation, location, or form actually matters to function or inspection.

Are all fourteen symbols used equally?

No. Profile, position, flatness and a few others do most of the work in product design. The full set is here so you can recognise the rest and not misuse them.