PCB layer stackup builder
Visualise 2, 4, 6 and 8-layer PCB stackups with impedance and EMI guidance. A free stackup builder for hardware engineers on brahm.design.
The stackup is the first electrical decision on a multilayer board. It decides whether you have a continuous reference for high-speed lines, where return current can flow, how much coupling you get between layers, and how hard the fab will find the construction. This builder visualises common 2, 4, 6 and 8-layer stackups and offers impedance and EMI guidance so you can choose a construction on purpose.
A two-layer board can be the right choice for a simple, slow design if you keep a generous ground and accept the limits. A four-layer board with the classic signal / ground / power / signal (or signal / ground / ground / signal) arrangement is the usual step up for a dense digital or mixed board: you get a much better reference and a more predictable impedance. Six- and eight-layer stacks add room for additional signal pairs, a cleaner power distribution, and better shielding — at a cost and with more chances to bury a return path if you are careless.
Impedance is a function of trace width, spacing, dielectric constant, height to the reference, and copper weight. The builder is a visual and advisory tool, not a full 2D field solver. For a controlled-impedance job, agree the stack and the target (for example 50 Ω single-ended, 90 or 100 Ω differential) with the fab and use their calculator or a solver with the actual prepreg and core thicknesses.
EMI starts with the stack: a tight return, no slotted reference under a fast line, and a place for a stitching via when a route has to change reference. The builder will remind you of those habits. It will not replace a layout review or a measurement.
Example
A defensible four-layer starting point. Top signal, inner ground, inner power, bottom signal, with the tight dielectric between top and ground so that most short, fast routes on top see a close reference. Power and ground are adjacent, which helps their high-frequency capacitance. That is not the only good four-layer stack, but it is a clear default you can then adjust with the fab. The builder is there so you pick that default on purpose.
How to use this tool
- Open the Stackup Builder and start from the layer count you can actually afford and assemble.
- Prefer a construction that gives every fast net a close, continuous reference plane.
- Note which layers will carry controlled-impedance lines and which will carry power.
- Take the chosen stack to your fab and ask for a controlled-impedance build-up if you need one, with their dielectric thicknesses.
- Lock the stack in the CAD project before you fan out a BGA or a long difference pair.
Frequently asked questions
Can I enter exact core and prepreg thicknesses?
Use the builder to choose a family of stack and to think about references. Enter the exact build with your fab’s materials when you need a quoted impedance.
Is four layers enough for USB or HDMI?
Often yes, with a solid reference and a competent impedance calculation. Some designs need six or more for density, for shielding, or for a cleaner power plan. The interface standard and the layout matter as much as the layer count.
Should power be a plane or a poured shape?
A plane or a well-stitched pour on a dedicated layer is usually better than a skinny trace for anything that moves current or is a reference. The right answer depends on the stack and the currents.
Does this compute trace width for 50 Ω?
It offers guidance, not a guaranteed width. For a production impedance, use the fab’s stack and a calculator or solver.